|
|
|
Who's Online
There currently are 5945 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
;
Manual was complete and available promptly, since I had lost my original manual. Very good response.
;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
5 - Erasing a track
of the loop is the point at which you want to divide the track.
2
After pressing the EDIT key, turn the DATA dial until the display shows:
ERASE TRK ?
NOTE You can set the length of the jog loop in the menu system (see 3.5, "Jog loop length").
3 4
Turn the SHUTTLE wheel clockwise to change the display:
Track OK ?
5
When the start of the jog loop is correctly positioned, turn the SHUTTLE wheel clockwise. The display shows Now Editing, and Complete when the editing operation has �nished.
If you want to change the track to be erased at this stage, you can use the TRACK keys to change the current track. Turn the SHUTTLE wheel clockwise to erase the track. The display shows Now and Complete when the Editing,
5
The track title of the �rst track created by the division process will have the same title as the original track (before the division took place). The second track will be untitled.
erase operation is �nished.
5.4 Combining tracks
This editing function allows you to combine a track with the previous track. It is not possible to combine two non-adjacent tracks (but you can move such tracks and then combine them�see 5.5, "Moving tracks"). Before the combine operation, the tracks and numbers look like:
Track number 1 2 The playback position is here 3 4
NOTE If the divide point is set to a track boundary (the start of a track), the display will show an error message (Not Execute!) when the SHUTTLE wheel is turned in step 4 above.
5.3 Erasing a track
This operation erases a track and frees the space for further recording.
These tracks are to be combined
Before this edit operation, the tracks and numbers look like:
Track number 1 2 3 4
After the combine operation, they look like:
Track number 1 2 3
This track is to be erased
After the operation, the tracks and numbers look like:
Track number 1 2 3
Note that the following tracks are renumbered to provide a contiguous sequence.
1
Note that the tracks following the erased tracks are automatically renumbered, so that the numbering sequence is contiguous. Tracks can be erased while the MD-801 is stopped, or in play, or in play ready mode.
Use the TRACK keys, or any other convenient method, to select the second track of the pair to be combined (the selected track will be combined with the one before it). After pressing the EDIT key, turn the DATA dial until the display shows:
COMBINE ?
2
1
Set the playback position at the track to be erased (use the TRACK keys or any other convenient way of locating to the track).
3
Turn the SHUTTLE wheel clockwise to enter the rehearsal mode:
Rehearsal
5�2 TASCAM MD-801R/P Mk II
|
|
|
> |
|
